# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
if(WIN32)
    set(USERHOME $ENV{USERPROFILE})
else()
    set(USERHOME $ENV{HOME})
endif()
set(sdkVersion 2.1.0)
set(toolchainVersion 13_3_Rel1)
set(picotoolVersion 2.1.0)
set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
if (EXISTS ${picoVscode})
    include(${picoVscode})
endif()
# ====================================================================================
# Generated Cmake Pico project file

cmake_minimum_required(VERSION 3.13)

set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 17)
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

# Initialise pico_sdk from installed location
# (note this can come from environment, CMake cache etc)

# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
if(WIN32)
    set(USERHOME $ENV{USERPROFILE})
else()
    set(USERHOME $ENV{HOME})
endif()
set(sdkVersion 2.1.0)
set(toolchainVersion 13_3_Rel1)
set(picotoolVersion 2.1.0)
set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
if (EXISTS ${picoVscode})
    include(${picoVscode})
endif()
# ====================================================================================
set(PICO_BOARD pico CACHE STRING "Board type")


set(TOP ${PICO_TINYUSB_PATH})

# Pull in Raspberry Pi Pico SDK (must be before project)
include(${PICO_SDK_PATH}/external/pico_sdk_import.cmake)

project(usb-test C CXX ASM)

# Initialise the Raspberry Pi Pico SDK
pico_sdk_init()

# Add executable. Default name is the project name, version 0.1

add_executable(usb-test 
    src/quadrature.c
    src/usb-test.c 
    src/tusb_descriptors.c
    )

pico_set_program_name(usb-test "usb-test")
pico_set_program_version(usb-test "0.1")

# Modify the below lines to enable/disable output over UART/USB
pico_enable_stdio_uart(usb-test 0)
pico_enable_stdio_usb(usb-test 1)

pico_generate_pio_header(usb-test ${CMAKE_CURRENT_LIST_DIR}/src/quadrature.pio)

# Add the standard library to the build
target_link_libraries(usb-test
        pico_stdlib
        pico_multicore
        pico_time
        hardware_pio
        hardware_clocks
        hardware_gpio
        hardware_sync
        tinyusb_board
        tinyusb_device)

# Add the standard include files to the build
target_include_directories(usb-test PRIVATE
  ${CMAKE_CURRENT_LIST_DIR}
  src/
)

pico_add_extra_outputs(usb-test)